Petroleum coke recarburizer is an auxiliary additive, so how can it be used correctly? When using graphitized petroleum coke recarburizer, try to put the graphitized petroleum coke recarburizer in the middle and lower part of the furnace, and add other charge on it, so as to reduce the overflow of graphitized petroleum coke recarburizer, and at the same time. Improve the contact surface of graphitized petroleum coke recarburizer and molten iron, thereby improving the efficiency of graphitized petroleum coke recarburizer. If the graphitized petroleum coke recarburizer is used in a relatively large furnace, it should be added in multiple times, which can better improve the dissolution rate and absorption rate of the graphitized graphitized petroleum coke recarburizer. It can also buffer the impact on the furnace bottom when iron is added. This can also protect the role of the furnace lining. Graphitized petroleum coke recarburizer is used in casting, which can greatly increase the amount of scrap steel, reduce the amount of pig iron or eliminate the need for pig iron.

Our low-sulfur and low-nitrogen Graphitized Petroleum Coke is made of calcined petroleum coke which is raw material, going through fully continuous graphitization process under the high temperature of minimum 2600℃ . Through crushing, screening and classification, we supply different particle size between 0-50mm at the customers' request. As the preferred material for high-end customers in the casting industry, "XINTAN" carbon raiser has excellent characteristics of high carbon content, good absorption rate and stable quality,

--Spec of Graphitized petroleum coke

Remark:

Size: 1-5mm, 2-5mm,1-3mm ,0.2-1mm or customize