Product center
Professional supplier of Recarburizer, catalyst and other new materials
全部分类
Product center
1/1
Number of views:
1000
Ozone O3 decomposition catalyst
Other Name:ozone removal catalyst/ozone destruction catalyst/catalytic destruction of ozone
Model:XT-CAT-02
Regular Package: 35kg into Iron drum
Origin: China
Appearance:Columnar,Black or Dark Brown Particles
Properties:High efficiency for Catalytic Destruction of Ozone
Application: Application fields: ozone decomposer; ozone source wastewater treatment; ozone treatment in printing plants and chemical plants; ozone-type sterilization rooms, medical disinfection cabinets, etc.
Retail price
0.0
$
Market price
0.0
$
Number of views:
1000
Product serial number
Category
Ozone decomposition catalyst
Quantity
-
+
Stock:
0
产品描述
-Ozone O3 destruction/decomposition catalyst Introduction
Xintan ozone destruction/decomposition catalyst is a mixture of copper oxide and manganese dioxide (MnO2 and CuO2 ), which is mainly used to decompose ozone. It contains manganese based nano composites without any activated carbon. Based on the persistent development and cooperation with Central South University over 10 years, Xintan has built cooperation with many well-known enterprises at home and abroad, owing to its high-efficiency and low-cost Xintan ozone destrcution catalyst .
-Main Ingredients：
58~65% MnO2,
10~25% CuO;
15~20% Al2O3
-Shape and color
columnar,black or dark brown pellets
-Size of Granules(mm)
Diameter:Ф3.0～3.8 orФ4.5～5.2 .Diameter of ozone destruction catalyst can also be customized.
Length: 5～15
-Bulk Density
0.78～1.0 g/ml
-Intensity
40～70 N/cm
-Working Temperature
Generally used at room temperature (20～ 30℃), when the temperature is between 50～100℃, the using effect is better.
-Working life and installation
Service time of ozone destruction catalyst can reach 8000～16000 hours, Xintan team can offer professional advice about installation of ozone destruction catalyst.
- Space velocity
0.5-5*104 h-1
Xintan Ozone deccomposition catalyst is suitable for high-concentration ozone over 100mg/L , For the decomposition of ultra-high concentration ozone gas, it needs to be controlled at 800~2000h-1 when the concentration is over 100mg/l. Minimum height of catalyst bed should be 30mm. For detailed applications, Xintan team can offer professional advice.
-ozone destruction rate
The ozone decomposition rate of this catalyst is higher than 99%
- Catalyst poisons
Pls avoid contacting below materials or gas:
Sulfide,NOx ，heavy metals ，hydrocarbons and halogenated compounds
- Regeneration
When the ozone destruction catalyst is used for a certain period of time (about one year), its activity will decline due to the accumulation of moisture
absorption. The catalyst can be taken out and placed in the 100℃ oven for min12 hours . It can also be taken out and exposed to the
strong sun if oven is not available, which can partially restore the performance and reuse.
-Application
Xintan ozone decomposition catalyst is suitable for gas treatment with ozone concentration above 1000PPM . Ozone concentration of 20 mg/L is recommended, It can be widely used in the synthesis of fine chemicals ,the treatment of tap water and waste water, as well as in atomic energy, radio and supersonic passenger jet advanced cabin, photocopiers, household appliances and other occasions.
a)Sterilization and disinfection.
b)Off-gas from ozone generator,wastewater and drinking water treatment.
c) Other areas related with ozone
Scan the QR code to read on your phone
Previous
None
Related Products
Previous page
1
Next page
T : +86-731-84865096
M:+86-18975862731(Nicole)
Registered Address： NO.6 Building,Rongtai Plaza,
Changsha,Hunan Province,China,410205
Head office: Yinhe Science Park, High-tech Zone, Changsha, Hunan Province,China.410221
